Step 1 - Download Android 4.4.2 Kit-Cat
ROM and Google Apps for Galaxy Core Duos I8262
on your computer.
Step 2 - Connect and mount your Galaxy Core
Duos I8262 USB memory on your computer using
the USB cable.
Step 3 - Now copy/paste the downloaded Android
4.2.2 zip file to your SD card. Make sure the
file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect
from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch
ON the phone while pressing and holding Volume
Up + Home + Power buttons together. You will get
an exclamation mark now. Again, hold your Volume
Up + Power buttons. You should now be in your
Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery ,
select perform a full data wipe by selecting “ wipe
data/factory reset ” Use the Power button to
select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting
“wipe cache partition ” carefully.
Step 8 - Now this is optional, but it is
recommended to perform a wipe of your dalvik
cache as well. You will not get into boot loops or
any other errors. From CWM recovery, go to
‘advanced’ and then select “ wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen
and select “install zip from SD card ”.
Step 10 - Now select “ choose zip from sdcard ”.
Using your volume keys, navigate to the Android
4.4.2 ROM zip file that you copied to your SD card
and select it using the Power button. Confirm the
installation on the next screen and the installation
procedure should start now.
Note: Repeat the same process with Google
Apps as well as you did in step 10.
Step 11 - After the installation completes, go to
“+++++Go Back+++++” and reboot the phone by
selecting “ reboot system now ”
Your Samsung Galaxy Core Duos I8262 will boot
now and it might take about 5 minutes to boot on
your first time. So, please wait.
That’s it! Your Galaxy Core Duos I8262 should now
have Android 4.4.2 KitKat Custom
Firmware installed on your phone! Go to Settings
> About phone to verify.
Download kit-cat 4.4.2
Google apps
How to install cwm?
0 comments:
Post a Comment